GB
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Guarantee
•
We grant a 24-month warranty for this
appliance. Industrial use will invalidate
the guarantee.
•
Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain compo-
nents are subject to normal wear and
tear and are excluded from the guaran-
tee. These include in particular: Tines.
•
Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
•
Damage, which has been caused from
material or manufacturing faults, will be
made good free of charge, by replace-
ment delivery or repair.
This requires that the appliance is re-
turned to our service center undisman-
tled and with proof of purchase and
guarantee.
78
Repair service
•
Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
•
Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
•
Defective units returned to us will be
disposed of for free.