Spare Parts/Accessories; Disposal, Environmental Protection; Technical Specifications - Grizzly Tools EGT 1440 Traducción Del Manual De Instrucciones Original

The device must not be used
if the handles are folded over.
Risk of injury.

Spare Parts/Accessories

Spare parts and accessories can be
obtained at www.grizzly-service.eu
If you have any other questions, contact the
"Service-Center" (see "Service-Center").
(2x3, 400 mm).......91104436
Cutting blade
(2x2, 320 mm).......91104446
Cutting blade
Disposal, environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Do not dispose of electrical appli-
ances in household waste.
• Return the tool to a recycling centre.
The plastic and metal parts used can
be separated and sorted for recycling.
Ask our service centre for details.
• To dispose of the packaging, place the
box with waste paper. Dispose of plas-
tic parts in the dual system.
• We will dispose of your defective
equipment sent in, free of charge.

Technical specifications

Electric Garden Hoe ............... EGT 1440
Motor power input ......................... 1400 W
Mains voltage ............. 230-240 V~, 50 Hz
Idling speed (n ) ................ 280 min
0
Safety class .........................................
Degree of protection
Max. working width ...................... 400 mm
Number of tine wheels ............................ 6
Max working depth ...................... 220 mm
Weight ...........................................11.8 kg
Sound pressure level
(L ) .........................71.75 dB(A), K
pA
Sound power level (L
Measured ...... 91.75 dB(A ); K
Guaranteed ................................ 93 dB(A)
Vibration on the grip (a
on the right .....1.130 m/s
on the left .......1.187 m/s
Noise and vibration values have been
determined according to the standards
and regulations named in the declaration
of conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not ac-
cept liability for statutory claims arising
from the manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
GB
(rpm)
-1
..........................IPX4
= 3 dB
pA
)
WA
=0.5 dB
WA
)
h
, K = 1.5 m/s²
2
, K = 1.5 m/s²
2
II
77