Publicidad
Idiomas disponibles
Idiomas disponibles
EN
product identification data
trade name: GENIUS 030A RA (steel flight)
type: winder staircase
STRUCTURE
description
composed of metal supports (1), internal spacers (2) and external spacers (3)
assembled to each other with bolts
materials
bolts: 8.8 steel
metal supports and internal spacers: Fe 370
external spacers (3): polycarbonate
accessories (8): ABS
finish
metal supports and internal spacers: epoxy powder coated in furnace
TREADS
description
straight fanned out wooden treads (4) and landings assembled to the structure with
bolts
materials
beech / ash / oak
finish
water-based colouring and UV painting
RAILINGS
description
composed of vertical metal balusters (5) fastened to the treads (4) and a wooden
handrail (6)
materials
balusters (5): Fe 370
handrail (6): beech / ash / oak
fixings (7): zamak
finish
balusters: epoxy powder coated in furnace
wooden handrail: water-based colouring and UV painting
OBLIGATORY CLEANING AND MAINTENANCE
Clean the treads as soon as dirt spots and dust deposits appear and at least every 6 months using a soft cloth
moistened with water and specific non-abrasive and non-aggressive detergents. NEVER use abrasive scourers.
After cleaning, thoroughly dry the surfaces with a microfibre cloth to remove the haloes that form because of the
limestone in the water.
Approximately 12 months from the date of installation, check tightness of the screws of the various components.
Should even the smallest malfunction occur, it is obligatory to immediately and professionally carry out extraordinary
maintenance.
USE PRECAUTION
Avoid any improper use that is not in accordance with the product. Possible violations or installations which don't
comply with the providers instructions can invalidate the agreed product conformities.
43 - Genius 030A RA
Publicidad
