Electrical Installation; Connect The Sampler To Power - Hach AS950 Manual Del Usuario

• Make sure that the intake tube is not pinched.
Figure 7 Instrument installation
1 Strainer
2 Vertical lift
Figure 8 Intake tube installation

5.6 Electrical installation

5.6.1 Connect the sampler to power

Electrocution hazard. If this equipment is used outdoors or in potentially wet locations, a
Ground Fault Circuit Interrupt (GFCI/GFI) device must be used for connecting the
equipment to its main power source.
14 English
3 Intake tube
D A N G E R