Controller Connections - Hach AS950 Manual Del Usuario

Fire hazard. Install a 15 A circuit breaker in the power line. A circuit breaker can be the
local power disconnect, if located in close proximity to the equipment.
Electrocution hazard. Protective Earth Ground (PE) connection is required.
Electrocution hazard. Make sure that there is easy access to the local power disconnect.
Connect the sampler to a battery (8754400) or an AC power supply (8754500US, 8754500EU or
8754500UK). Refer to
Figure 9 Connect the sampler to power

5.6.2 Controller connections

Electrical shock hazard. Externally connected equipment must have an applicable
country safety standard assessment.
Figure 10 shows the electrical connectors on the controller.
W A R N I N G
Figure 9.
W A R N I N G
D A N G E R
D A N G E R
English 15