Advice On Choice Of Coffee; Hot Water Jet - Saeco SIN 007 Instrucciones De Uso

COFFEE FLOW - CHOICE OF COFFEE - HOT WATER JET
• Fit the filter holder into the coffee
outlet socket (7), pushing it upwards and
turning it to the right until it locks into
place.
• Place a cup under the filter holder.
• To warm up the filter holder and the cup,
press the coffee switch (4); water will
begin to drip from the filter holder (this
operation is only necessary for the first
cup of coffee).
• When the cup is sufficiently full, press the
coffee switch (4) again.
• Remove the filter holder from the
machine by turning it to the left.
• To make one or two cups of coffee,
add 1 or 2 even measures of ground
coffee to the filter, depending on
whether you are using the single or twin
cup filter.
• Tamp the coffee down lightly using the
press included with the coffee maker and
brush off any excess coffee from the edge
of the filter holder.
• Fit the brass filter holder (15) into the
coffee outlet socket (7), as explained
above, pushing it upwards and turning it
to the right until it locks into place.
• Position two warmed cups under the
filter holder, making sure that they are
directly under the coffee spouts.
• Press the coffee switch. Wait until the cups
are sufficiently filled.
• Press the coffee switch again to stop the
coffee flow.
• When the coffee flow has ceased,
remove the filter holder and empty out
the excess coffee grounds.
Cleaning hint: when cleaning the
filter take it right out of the filter
holder and rinse thoroughly.
All manuals and user guides at all-guides.com
6
Practically any type of ground coffee on the
market can be used with this machine.
Coffee is a natural product and its taste
varies, depending on its origin and blend.
It is therefore advisable to try a number of
different types to discover your own perso-
nal preference.For best results use blends
specifically ground for espresso machines.
The coffee flow should be constant and
should not drip.
The speed of the coffee flow can be regulated
by changing the dosage, the fineness of the
grinding and/or by how heavily you tamp
down the coffee in the filter.
STEAM TUBE ("PANNARELLO") IS
POSITIONED OVER THE DRIP TRAY.
7
• If the machine is not already on, turn it on
•
• Open the "Hot water/steam knob (6),
•To stop the water flow, press the coffee
may be very hot.The steam tube does get
very hot, so avoid touching it in any way.
ADVICE ON CHOICE OF
COFFEE
BEFORE USING THE HOT WATER/
STEAM JET, MAKE SURE THAT THE

HOT WATER JET

at the main switch (3) which will light up.
Place a cup or a glass tea cup under
the steam tube ("Pannarello").
turning it in anti-clockwise direction and
press the coffee switch (4) to start the
water flow.
switch (4) again, and close the steam
knob (6) by turning it in a clockwise
direction.
Danger of burning!
When water begins to flow out, it
25