Using The Breast Pump; Charging The Breast Pump; Battery Indicator Light Description - Philips AVENT SCF394/62 Manual De Instrucciones

English
16

Using the breast pump

Flange size
The Philips Avent single/double electric breast pump Advanced has a soft, active flange. There is only
one flange size. It gently stimulates your nipple to trigger milk flow. The flange is made of flexible
silicone, fitting nipple sizes up to 30 mm/1.18 in.

Charging the breast pump

Fully charge the battery before you use the breast pump for the first time and when the battery is low.
Fully charging the battery takes up to 4 hours. Charged battery operates approximately 3 pumping
sessions.
1. Switch off the device.

Battery indicator light description

All lights are
steady on. The
battery is fully
charged.
Charged battery
operates
approximately
3 pumping
sessions.*
* One session is the equivalent of 15 minutes (double electric breast pump) or 30 minutes (single
electric breast pump).
2. Insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
Two lights are
steady on.
The battery is
charged
sufficiently for
maximum two
sessions.*
3. The battery is
charging.
First light flashes
slowly.
The battery is
charged
sufficiently for
maximum one
session.*
4. When the battery is
fully charged, remove
the adapter from the
power outlet and pull
the small plug out of
the motor unit.
First light flashes
quickly.
The battery is very
low, the device will
soon stop
operating,
charging is
needed.
Battery lights light
up one by one and
go out all together.
The battery is
charging.