Philips AVENT SCF394/62 Manual De Instrucciones página 18

English
18
3 sec.
9A. When the breast
pump is charged, you
can use it cordless.
Press and hold the
on/off button until the
device switches on.
Breast pump belt
The breast pump belt is intended to carry the motor unit of the electric breast pump while it is used to
express and collect breast milk. The breast pump belt allows the electric breast pump to be used
hands-free. The breast pump belt is intended to be worn over clothes.
Note: Pumping bra is not included in this product.
Using the breast pump belt
Charge the motor unit before using it in combination with the breast pump belt. Assemble and use the
breast pump belt as follows:
60—130 cm (24—51 in)
1. Place the breast
pump belt around your
waist and close it with
the hook and loop
fastener.
9B. You can also use
the breast pump
connected to the power
outlet. If the battery is
low, insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
2. Turn and adjust the
belt as necessary.
10. The breast pump is
now ready for use.
3A. Make sure the
pockets of the breast
pump belt are in the
front.
Note: You can place
the cover over the
flange to keep the
breast pump clean
when you take it with
you and while you
prepare for expressing.
3B. Do not wear the
breast pump belt
across your body.