Pumping Instructions - Philips AVENT SCF394/62 Manual De Instrucciones

Pumping instructions

Warning: Before you remove the pump body from your breast, always switch off the
breast pump to release the vacuum.
Warning: Do not continue pumping for more than 5 minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
Warning: If the process becomes very uncomfortable or painful, stop using the pump
and consult your healthcare professional.
Caution: If discomfort is felt, then suction can be broken by inserting a finger between the breast
and the flange.
Note: If you regularly express more than 125 ml/4 fl oz per session, you can purchase and use a
260 ml/9 fl oz Philips Avent Natural bottle to prevent overfilling and spillage.
Note: The breast pump can be used cordless if it is sufficiently charged, but you can also use it
connected to the power outlet.
1. Wash your hands
thoroughly with soap
and water and make
sure that your breast is
clean.
2. Place the breast
pump kit onto your
breast. Make sure that
you center your nipple.
3 sec.
3. Press and hold the
on/off button until the
device switches on. The
indicator lights go on to
indicate that the device
is in stimulation mode.
English
4. The breast pump
starts in stimulation
mode and slowly
increases its vacuum to
the last used
stimulation suction
level (or level 5 when
used for the first time).
21