Dust Extraction; Protecting The Environment - Stanley FATMAX SFMCS550 Manual De Instrucciones

Ripping
A rip fence is supplied with your tool.
Ripping is the process of cutting wider boards into narrower
strips – cutting grain lengthwise. Hand guiding is more
difficult for this type of sawing and the use of a rip fence
is recommended.
@

Dust Extraction

WARNING: Risk of dust inhalation. To reduce the
risk of personal injury, ALWAYS wear an approved
@
dust mask.
WARNING: ALWAYS use a vacuum extractor
designed in compliance with the applicable directives
regarding dust emission when sawing wood. Vacuum
hoses of most common vacuum cleaners will fit
directly into the dust extraction outlet.
A dust extraction port (18) is supplied with your tool. The dust
extraction port allows you to connect the tool to an external
dust extractor.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
@
regular cleaning.
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
● Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
No-load speed
Max depth of cut
o
Max depth of cut at 45 bevel
Blade diameter
SFMCS550
V
dc
-1
min
5,000
mm
mm
mm
(Original instructions)
Blade bore
Blade tip width
Weight
L (sound pressure) 84.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 95.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Cutting wood (a
Charger
Input Voltage
Output Voltage
Current
Battery
Voltage
Capacity
Type
EC declaration of conformity
MACHINERY DIRECTIVE
SFMCS550 Circular Saw
STANLEY FATMAX declares that these products
describedunder "technical data" are in compliance with:
EN62841-1:2015 , EN62841-2-5:2014.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY FATMAX at the following address or refer to
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
STANLEY FATMAX Europe, Egide Walschaertsstraat 14-18,
18
65
50
190
ENGLISH
mm 30
mm 1.8
kg
3.2
2
) 1.4 m/s , uncertainty (K) 1.5 m/s
h, W
SFMCB11/SFMCB12/SFMCB14
V 230
ac
V 18
dc
A 1.25/2.0/4.0
SFMCB201/202/204/206
V 18
dc
Ah 1.5/2.0/4.0/6.0
Li-Ion
%
the back of the manual.
STANLEY FATMAX .
Director – Consumer Power Tools
2800 Mechelen, Belgium
2
Ed Higgins
25/11/2019
11