SETTING UP YOUR ACTION-X5
Installing the nano SIM/micro SD card
1. Check that your device is turned off. If not, switch it off by pressing the On/Off
button.
2. Eject the nano SIM/micro SD card tray using the tool provided, inserting it into the
hole designed for this purpose, as shown below.
3. Remove the tray completely.
4. You can insert 2 nano SIM cards and a micro-SD card into your phone.
a. For optimal compatibility with operator services, insert your nano SIM card
into the slot on the right (SIM 1) with the metal side facing down.
b. If required, you can insert a second nano SIM metal side down into the middle
compartment (SIM 2) and/or a micro SD card into the left compartment.
5. Slide the tray back into the phone.
a. Make sure the cards are properly aligned.
b. Check that the tray is properly aligned with the slot in the phone when you
slide it back in.
c. Insert the tray and push it in, as shown above.
Important: To guarantee that your smartphone is dust and waterproof, make sure that
the tray is fully inserted and locked.
SIM 2
SIM 1
sim 2
sim 1
57
SIM 1
sim 1
MICRO SD
micro sd
SIM 2
SIM 1
sim 2
sim 1