X-Link Tm; X-Blocker; Setting Up Your Core-X5; Installing The Nano Sim/Micro Sd Card - Crosscall CORE-X5 Manual De Instrucciones

X-LINK
TM*
The smart magnetic attachment system
This magnetic connector located on the back of your phone can be used to attach and connect
it with ease to exclusive X-LINK accessories�
TM*
Depending on the accessories used, the X-LINK™* system also lets you charge your phone and/
or transfer data�

X-BLOCKER

The reinforced mechanical mounting system
In situations that require maximum hold, this exclusive accessory supplied with your mobile
guarantees the secure attachment of your phone to compatible accessories (20kg pull force)�
It is easily attached to the slots on the side of your mobile� The silicone coating reduces
vibrations caused by knocks�
Before starting an activity, check that your X-BLOCKER is properly inserted into the two slots
on the phone�
See the full range of accessories compatible with the X-LINKTM*and X-BLOCKER
at www.crosscall.com
*Magconn Technology
60

SETTING UP YOUR CORE-X5

Installing the nano SIM/micro SD card

1. Make sure that your device is turned off� If not, switch it off by pressing the On/Off button�
2. Eject the nano SIM/micro SD card tray using the tool provided, inserting it into the hole
designed for this purpose, as shown below�
3. Remove the tray completely�
4. You can insert 2 nano SIM cards and a micro-SD card into your phone�
a. To ensure optimal compatibility with operator services, insert your nano SIM card,
metal side down, in the smallest compartment (SIM 1)�
b. If required, you can insert a second nano SIM metal side down into the middle
compartment (SIM 2) and/or a micro SD card into the left compartment�
SIM 2 SIM 1
sim 2 sim 1
5. Slide the tray back into the phone�
a. Make sure the cards are properly aligned�
b. Check that the tray is properly aligned with the slot in the phone when you slide it
back in�
c. Insert the tray and push it in, as shown above�
Important: To guarantee that your smartphone is dust and waterproof, make sure that the tray
is fully inserted and locked�
SIM 1
sim 1
MICRO SD micro sd SIM 2 SIM 1
sim 2 sim 1
61