Franke FHI 754 4I ST CTX Manual De Instrucciones página 24

CERAMIC-GLASS COOKTOP
Hob control elements
Slide control power
Hob control
Activating the hob
Turning hotplates on
24
1. Induction hotplate front left
2. Induction hotplate rear left
3. Induction hotplate rear right
4. Induction hotplate front right
5. Hob control panel
A. ON/OFF sensor of cooktop
B. Pause function sensor
C. Safety lock on/off and child lock sensor
D. Timer sensor
E. Slide control
F. Warming function sensor (42°C)
G. Warming function sensor (74°C)
• After turning the ceramic glass hob on all displays come on for a moment. The
hob is ready for operation.
• The hob is fitted with electronic sensors which are switched on if you touch the
relevant circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization
• Always keep the sensor surface clean.
Touch the (A) sensor for at least one second. The hob is now active, and all
hotplate power indicators indicate »0«.
Now you need to select the next setting within 10 seconds, otherwise the hob
switches off again.
After turning the hob on using the (A) sensor, within the next 10 seconds start one
0
Medium power
Full power
).