Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Heat up time automatic
Safety switch off
Protection from
overheating
pressing any sensor, or it turns off by itself after 2 minutes.
If you want to switch the timer off prior expiry of preset time:
• The cooktop must be turned on.
• Press timer's sensor ON/OFF (D) 2 times.
• Slide on the cursor (E) of any cooking zone to the left until the value »0«. The
alarm turns off.
When automatic cooking mode is activated the hotplate will operate at maximum
power for a limited period of time and then automatically switch to the reduced
power level to resume cooking. It may be switched on in any of the hotplates for all
power settings except for setting "9" where power is set at maximum all the time.
Automatic cooking mode is activated on any idle hotplate.
• Choose the required continuous cooking level and hold it for 3 seconds.
• The activated heat up time automatic will be displayed through alternating
between „A" and the selected continuous cooking level on the display.
As soon as the parboiling time is over, the preselected continuous cooking level is
valid again.
Once the time from the chart below expires, the function is switched off and "A"
disappears.
You can also switch the automatic cooking mode off anytime by bringing power
setting to "0".
Power setting
Max. power
Power setting
Hours lapse prior safety
switch off
Maximum continuous operation of a particular hotplate is limited, and the duration is
displayed in the above chart. When the hotplate is switched off by the safety
mechanism, the indicator displays symbols "0", or "H" in case there is any
remaining heat left.
In such cases switch the hotplate off by touching the slide sensor (F) at the start,
bring the power setting to "0".
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not
change the above setting, the safety mechanism will switch the hotplate off after 4
hour and a half.
Induction hotplate is also fi tted with safety device against overheating which
protects electronic parts from damages. This device operates on several levels.
When temperature of the hotplate excessively rises, it switches on two-stage fan. If
this is not enough, extra powerful heating is deactivated, and finally the safety
device either reduces the heating power of certain hotplates or turns them off
completely. When the hotplate cools off, the full power of hotplate is again
available.
1
2
3
4
40''
1'12''
2'
2'56''
1
2
3
4
8,5
6,5
5,5
4,5
3,5
5
6
7
8
4'16''
7'12''
2''
3'12''
5
6
7
8
9
3
2,5
2
1,5
29
Publicidad
Tabla de contenido
