General Safety Precautions - Makita LS1016 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model
Blade diameter
Hole diameter
Max. Cutting capacities (H x W)
Miter angle
0°
45°(right and left)
52°(right and left)
60°(right)
Special Max. Cutting capacities
Crown molding 45 ﾟ type
(with Crown molding stopper used)
(with Horizontal vise used)
No load speed (RPM)
Laser Type (LS1016L only)
Dimensions (L x W x H)
Net weight
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working
order.
45° (left)
47 mm x 305 mm (1-7/8"x12")
61 mm x 279 mm (2-3/8"x11")
47 mm x 215 mm (1-7/8"x 8-1/2")
61 mm x 197 mm (2-3/8"x 7-3/4")
-
-
Base board (H)
Bevel angle
71 mm x 305 mm (2-13/16"x12")
91 mm x 279 mm (3-5/8"x11")
71 mm x 215 mm (2-13/16"x 8-1/2")
91 mm x 197 mm (3-5/8"x 7-3/4")
71 mm x 187 mm (2-13/16"x 7-3/8")
91 mm x 171 mm (3-5/8"x 6-3/4")
71 mm x 152 mm (2-13/16"x 6")
91 mm x 139 mm (3-5/8"x 5-1/2")
Wavelength 655 nm, Maximum output
USA007-2
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
5. DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
2
0°
29 mm x 305 mm (1-1/8"x12")
43 mm x 279 mm (1-11/16"x11")
29 mm X 215 mm (1-1/8"x 8-1/2")
43 mm x 197 mm (1-11/16"x 7-3/4")
168 mm (6-5/8")
120 mm (4-3/4")
718 mm x 640 mm x 671 mm
(28-1/4" x 25-1/4"x 26-1/2")
LS1016/LS1016L
255 mm (10")
15.88 mm (5/8")
45° (right)
-
-
3,200/min.
1mW (Laser Class II)
23.7 kg (52.2 lbs)