General Safety Precautions - Makita LC1230 Manual De Instrucciones

Sierra tronzadora
Ocultar thumbs Ver también para LC1230:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
SPECIFICATIONS
Hole (arbor) diameter
No load speed (RPM)
Dimensions (L x W x H)
Cutting capacity
Workpiece shape
Cutting angle
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working
order.
3.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
Model
Blade diameter
Net weight
90°
45°
516 mm x 306 mm x 603 mm (20-1/3" x 12" x 23-5/8")
115mm (4-1/2")
90mm (3-1/2")
USA007-2
5.
DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6.
KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8.
DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
11.
ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday
resistant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
2
LC1230
305 mm (12")
25.4 mm (1")
1,300 /min.
19.0kg (41.8 lbs)
A
A X B
A
75 mm x 150 mm (2-15/16" x 5-7/8")
100 mm x 100 mm (3-15/16" x 3-15/16")
85 mm x 85mm (3-5/16" x 3-5/16")
eyeglasses
only
have
B
impact

Publicidad

Tabla de contenido
loading

Tabla de contenido