General Safety Precautions - Makita LS1018 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model
Blade diameter
Hole diameter
Max. Cutting capacities (H x W)
No load speed (RPM)
Dimensions (L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the
owner's manual carefully. Learn the tool's
applications and limitations, as well as the
specific potential hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
5. DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
Miter angle
0°
45°
60° (right)
45° (left)
50 mm x 305 mm
(2" x 12")
50 mm x 215 mm
(2" x 8-1/2")
-
USA007-2
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
11. ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday
resistant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
14. MAINTAIN TOOLS WITH CARE. Keep tools
sharp
performance.
lubricating and changing accessories.
15. DISCONNECT TOOLS before servicing; when
changing accessories such as blades, bits,
cutters, and the like.
2
Bevel angle
0°
91 mm x 305 mm
(3-5/8" x 12")
91 mm x 215 mm
(3-5/8" x 8-1/2")
91 mm x 150 mm
(3-5/8" x 5-7/8")
825 mm x 536 mm x 633 mm
(32-1/2" x 21-1/8" x 25")
eyeglasses only
and clean for best
Follow instructions
LS1018
255 mm (10")
15.88 mm (5/8")
45° (right)
31 mm x 305 mm
(1-1/4" x 12")
31 mm x 215 mm
(1-1/4" x 8-1/2")
-
4,300 /min
19.8 kg (43.7 lbs)
have impact
and safest
for