Sanus VXT7-B2 Manual De Instrucciones página 11

Determine Your Wall Plate Configuration
Measure the distance between your TV brackets
For TV brackets
*
700mm or less
Skip to STEP:
2A (wood Stud)
on PAGE 12
or 2B (concrete)
on PAGE 15
≤ 700mm (27 ½ in.)
04 10
05
*
NOTE: For Wood Stud Installations ONLY: You can extend
the wall plate to allow your TV to shift side-to-side. Be sure to
10
not extend the wall plate past your TV edge.
10
04
For TV brackets
greater than 700mm
Extend the wall plate
to fit the TV brackets.
> 700mm (27 ½ in.)
04
05
10
10
. Extend your wall plate
05
/
, but not past your TV edges.
04 05
/
WARNING:
Avoid potential personal injuries!
These areas could be pinch points when sliding back together.
10
04
beyond your TV brackets
10
NOTE:
If needed,
loosen the nuts
shown to help
slide open.
05
11