Sauder 430083 Manual Del Usuario página 10

Step 5
Open the FURNITURE TIPPING RESTRAINT KIT (96)
å
and fasten the SAFETY STRAPS to the TOP (D). Use the
provided SHORT SCREWS.
Insert two WOOD DOWELS (1) into the UPRIGHT (C).
å
Fasten the TOP (D) to the UPRIGHT (C). Use two 2" FLAT
å
HEAD SCREWS (12).
NOTE: You should start each SCREW a few turns before
å
completely tightening any of them.
NOTE: Be sure the WOOD DOWELS in the UPRIGHT
å
insert into the TOP.
Page 10
96
(2 used)
These holes must be here.
E
www.sauder.com/service
2" FLAT HEAD SCREW
(2 used in this step)
D
O
C
Use the SHORT SCREWS
from the RESTRAINT KIT.
D
12
1
430083