Publicidad
Step 17
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the
å
text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Place the ROD (11) onto the ROD HANGERS (7) inside
å
the cabinet.
Peel APPLIQUES from the APPLIQUE CARDS (10) and stick
å
them onto each visible HIDDEN CAM and SCREW head.
10
(5 used)
Page 22
Mounting screw (depth)
www.sauder.com/service
17
Adjusting screw (horizontal)
(vertical adjustment)
25 lbs. SMALL SHELF
25 lbs. each
ADJUSTABLE
SHELF
11
7
430083
Publicidad
