Sauder 430083 Manual Del Usuario página 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Fasten a ROD HANGER (7) to the UPRIGHT (C). Use two
å
1/2" FLAT HEAD SCREWS (15) though the outer holes in
the ROD HANGER.
Turn three CAM SCREWS (3) into the UPRIGHT(C). Flip
å
the UPRIGHT over and turn two CAM SCREWS into the
UPRIGHT exactly as shown.
3
Notch
Page 6
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
Notch
C
C
www.sauder.com/service
15
1/2" FLAT HEAD SCREW
(2 used in this step)
7
1
3
430083