Work And Safety Instructions; General Safety; Mechanical Safety - Festo Hydraulic Power Packs Instrucciones De Utilizacion

5

Work and safety instructions

5.1

General safety

•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.
5.2

Mechanical safety

•
Switch off the power supply!
–
–
–
•
Always assemble the cylinders with the corresponding cover.
•
Set all components up so that it's easy to activate the switches and interrupters.
•
Mount all of the components securely on the profile plate.
•
Follow the instructions about positioning the components.
•
Make sure that limit valves are not actuated from the front.
•
Risk of injury during troubleshooting!
Use a tool such as a screwdriver to actuate limit switches.
© Festo Didactic 369805
Switch off working and control power before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Be aware of potential overtravel times for the drives.
CAUTION
WARNING
CAUTION
Hydraulic power packs with 5 l tank
11