Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING THE PRUNER
A
DANGER:
Never cut near electric cords or lines. If blade jams
on any electrical cord or line, DO NOT TOUCH THE
CAN
BLADE1 IT
BECOME ELECl R ICALLY LIVE AND
VERY DANGEROUS. Continue to hold the pruner by the
handle or lay it down and away from you in a safe manner.
Disconnect the electrical service to the damaged line or
cord before attempting to free the blade from the line or
cord. Contact with the blade, other conductive parts of
the pruner, or live electric cords or lines will result in death
by electrocution or serious injury.
A
WARNING:
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of serious personal injury .
A
WARNING:
Read the safety information for safe operation using the
blade. Extreme
care
must be taken when using blades to
ensure safe operation. Refer to
Warnings
Pruner Safety Warnings.
and
CUTTING TIPS
Be certain the blade is securely installed before inserting
•
the battery pack. Check it periodically for tightness to
avoid serious injury.
•
Wear non-slip gl
oves
for maximum grip and protection.
Never stand directly under the limb you are cutting.
•
Do
not att em pt to cut limbs, stems or twigs that
•
than 1-1/2 in. thick, or those obviously too large to
into the cutt i ng blade. Use a non-powered hand saw,
pruning saw, or chain saw to trim larger limbs or branches.
•
Stand
that you
are
stable and balanced on both feet and
so
never use on a ladder, roof top, or other unstable support.
Never use the pruner near power lines, fencing, posts,
•
buildings, or other immovable objects.
If the blade become jammed, release the switch trigger,
•
allow the blade to stop, and remove the battery pack
free
before attempting to
Maintain a proper grip on the unit whenever the switch
•
trigger is depressed .
All manuals and user guides at all-guides.com
OPERATION
General
Safety
Po111 1er Tool
are
larger
feed
the blade.
MAKING A CUT
888 Figurss 5-
6.
A
WARNING:
Do
not place your second (support) hand on the front
housing under shoe assembly when operating the pruner
two-handed. Keep the second hand on top of the pruner
housing as illustrated in this operator's manual. Placing
your support hand on the front housing under the shoe
assembly could cause it to slip into the blade, resulting
in serious personal injury.
•
Hold the pruner firmly in front
you.
Make sure blade is clean of any debris or foreign material.
•
•
Depress the lock-out button, then pull switch trigger to
start the cutting action.
Place the shoe assembly against the work, then move
•
the blade into the work.
Use only enough pressure to keep the pruner cutting.
•
the blade and tool do the work. Use of
that causes bending or twisting
in broken blades.
The pruner is designed for one-handed use. H
•
for operator comfort and preference, the pruner may be
used two-handed by placing one hand lightly atop the
pruner as shown.
Do
not hold the pruner with your hand on the underside
•
of
the tool, near the saw blade.
9 - English
of
and clearly away from
Do not force.
excess ive
press u re
of
the blade may result
owev
Let
er,
Publicidad
Tabla de contenido
