GENERAL POWER TOOL SAFETY WARNINGS
•
Kee p cutti ng tools sharp and clean.
cutting tools with sharp cutting edges are less likely to
bind and
easier to control.
are
•
Usa the power tool, accessories and tool bits
in accordance with these instructions, taking into
the
account
working conditions and the work to be
of
perfonnad.
U se
the power tool for operations different
from those intended could result in a hazardous situation.
BATTERY
TOOL
USE AND CARE
•
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of
battery pack may create a risk
another battery pack.
Use power tools only with specifically designated
•
of
batte ry packs.
Use
any other battery packs may
a risk of injury and fire.
•
When battery pack Is not In usa, kee p
other metal objects, like paper clips. coins, keys, nails,
•
Hold powertool by Insulated gripping surfaces, when
performing an operation where the cutti n g access o ry
may contact hidden wiring.
contacting a "live" wire may make exposed metal parts
of the power tool •nve" and could give the operator an
electric shock.
•
Use clamps or another practical way to secure and
support
the
workpiece to a stable platform.
the work by hand or against your body leaves it unstable
of
and may lead to loss
•
Know your power tool. Read operator's manual
carefully.
Learn
ita applications and limitations, as
well as 1he specific potential hazards related to this
power tool.
Following this rule will reduce the risk of
electric shock, fire, or serious injury.
•
Always wear eye protection with side shields marked
to comply with ANSI
of
reduce the risk
serious personal injury.
•
Protect your lungs. Wear a face or dust mask if
is
operation
dusty.
Following this rule will reduce the risk
of serious personal injury.
Protect your hearing. Wear hearing protection during
•
extended periods of operation.
reduce the risk
of
serious personal injury.
•
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
Be
operating condition.
when not using your battery tool or when changing
acce&BOries.
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
All manuals and user guides at all-guides.com
Properly maintained
of
fire when used with
create
It
away from
PRUNER SAFETY WARNINGS
Cutting accessory
Holding
control.
Z87.1.
Following this rule will
Following this rule will
aware of possible hazards
or other small metal obJects, that can make a
scraws
connection from one terminal to another.
battery terminals together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from
ate.
the battery; avoid contact.
occurs, flush with water. If liquid contacts eyes,
additionally see k medical help.
battery may cause initation or bums.
SERVICE
• Have
your power tool serviced by a qualified repair
person using only identical replacement parts.
ensure that the safety of the power tool is maintained.
•
When servicing a power tool, use only Identical
replacement parts. Follow instructions in the
Maintenance section
parts or failure to follow Maintenance instructions may
create a risk
of
•
Do not place battery tools or their batteries near fire
or heat.
This will reduce the risk of explosion and possi b ly
injury.
•
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has bee n dropped
or received a sharp blow.
to explosion. Properly dispose of a dropped or damaged
battery immediately.
•
Batteries can explode in the presence
of
ignition, such as a pilot light.
serious personal injury, never use any cordless product
in the presence of open flame.
propel debris and chemicals. If exposed, flush with water
immediately.
Do not charge battery tool in a damp or
•
Following this rule will reduce the risk of electric shock.
For best results, your batte ry tool should be charged
•
in a location where
the
but less than
100°F.
injury, do not store outside or in vehicles.
•
Under extreme usage or temperature conditions,
battery leakage may occur.
with
your skin,
If liquid gats into your eyes, flush them with clean
water
for at least
medical attention.
of serious personal injury.
4- English
If
contact accidentally
Liquid ejected from the
of
of
this manual.
Use
shock or injury.
A damaged battery is subject
To reduce the risk
An
exploded battery can
the
temperature is more than 50°F
To reduce the risk
of
serious personal
If
liquid comes in contact
wash
with
immediately
soap and
10
minutes, then seek immediate
Following this rule will reduce the risk
Shorting the
This will
unauthorized
of
a source
of
wet location.
water .