LUND Trail Runner - Extruded Instrucciones De Instalación página 2

Installation Ste s
Slide square head bolts into slots on bottom of board.
Fasten brackets to board using square head bolts,
washers and nuts. Leave brackets loose.
1
Evenly space brackets on board. Hold board into
place on truck. Position end caps and treadmat
in desired location and mark holes on board.
2
Lower board and drill location with 3/16
drill bit.
3
45280
Rev. E
�f-------@
Page 2 of 4
©
"'
·
·.�