What's In The Box; Pre-Installation - BIG ASS FANS Essence Guia De Instalacion

2

What's in the box

CAUTION: Do not remove the main fan unit from its protective packaging prior to hanging it!
CAUTION: If you ordered multiple fans, be sure to keep the components of each fan together.
The fan is shipped in three labeled boxes. The large, square box contains the main fan unit, upper mount, upper mounting brace, lower
cover, wall controller, airfoil retainers, winglets or airfoil tips, cover plate assembly, hardware, and electrical components. Two smaller
boxes contain the airfoils and the extension tube and safety cable. Optional mounting kits (if ordered) are included in the main box and
are packaged in boxes that are labeled to identify the contents. If you are missing any piece required for installation, contact Big Ass
Fans. Note: Dashed lines indicate internal boxes or bags within the main box. Drawings below are not to scale. All boxes are labeled to
identify the contents.
Upper Mounting Upper Mount
Brace
Power Supply Controller Input
Cable Cable
3
RJ45 Adapter
Fire Relay Kit
Cable
Extension
Tube Box
Extension Tube, Safety
Cable, & Hardware
1. Guy wires (if ordered) are packaged separately within the main box. Brackets for guy wires are included for extension tubes longer than 4 ft (1.2 m).
2. The hardware may be bagged or packaged on hardware boards. If the hardware is stainless steel, do not use power tools.
3. Length = 20 ft (6.1 m).
4. Length = 20 ft (6.1 m). The controller input cable must be wired to the provided RJ45 adapter cable. See "Wiring the Fan" on page 29 for details.
5. A customer-supplied CAT5 cable must be connected to the adapter cable and routed to the wall controller. See page 30 for details.
6. Safety clips and carabiners are used only when the top of the mounting structure is inaccessible.
7. Square washers are needed only if you are mounting the fan to angle irons.
8. Optional. The Wood Frame Mounting Kit is included only if ordered and is packaged in the main box.
9. Optional. The L-Bracket Mounting Kit is included only if ordered and is packaged in the main box.
10. Winglets are standard on Essence
®
All manuals and user guides at all-guides.com

Pre-Installation

Mounting Hardware
Mounting Hardware
Note: Washers are double-stacked.
Extension Tube Hardware Main Fan Unit Hardware
Hardware is stainless steel. *004041-02-02*
Do not use power tools.
004041-02-02
Mounting
Hardware
2
Cover Plate
Assembly
4
Snap-on Ferrite
Core (Bagged)
5
Airfoil Box
(8) Airfoil
fans; however, airfoil tips are available as on option. Winglets or airfoil tips are installed on the airfoils during airfoil installation.
WWW.BIGASSFANS.COM
ESSENCE
®
Main Box
1
Main Fan Unit
Lower Cover
(2) Safety Clip
& Carabiner
(8) Winglet
10
OR
(8) Airfoil Tip
(optional)
10
©2013 DELTA T CORP. ALL RIGHTS RESERVED
Wall
Controller
Airfoil & Winglet Hardware
Winglet Hardware
Airfoil Hardware
(8) Airfoil
Retainer
Spare Hardware
Hardware is stainless steel. Do not use power tools. *004042-02-02*
004042-02-02
Airfoil &
6
Winglet
(8) Square
Hardware
2
Washer
Wood Frame Mounting Kit
Wood Frame Mounting
Brackets, Channels, & Hardware
L-Bracket Mounting Kit
(2) Safety Clip
L-Brackets
& Carabiner
7
8
9
6