Manual Settings - BALDR B0359WST2H2R Manual Del Usuario

2. Once signal received, the main unit will display the received
time/month/date/weekday with symbol "
3. Daily RCC signal receiving: there are regular radio signal receiv-
ing at 1:00AM,2:00AM, 3:00AM, 4:00AM, 5:00AM each day. It
starts receiving signal at 1:00AM everyday. For each day, once
signal received at any one receiving time, it will stop receiving
signal that day.
4 Manual receiving: press and hold " ▼/RCC " button to enter RCC
.
signal receiving.
5 During receiving,you can press " ▼/RCC " button to exit RCC .
receiving.
* RCC symbol display:
a. When receiving signal , RCC symbol "
b. When signal successfully received, LCD will display complete RCC
symbol "
c. If no signal is received, the RCC symbol will disappear.

Manual Settings

After signal received, if there is no need for other settings, you
1.
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal received,
you can follow bellow steps for Manual Setting.
. 2
Press and hold " SET " button to enter into setting, press " SET "
button to skip setting steps or go to the next setting option.
*Tips: press and hold "▲/ CH " or " ▼/RCC " button will quickly
change the value by 8 steps.
" and exit RCC receiving.
" displaying on screen.
" will be flashing by"1HZ".
10