Additional Safety Instructions For Pneumatic Machines; Additional Safety Information - Parkside PDSS 310 B5 Traducción Del Manual De Instrucciones Original

■ The automatic screwdriver must to be operated
and maintained in accordance with the recom-
mendations contained in this manual to reduce
any unnecessary vibration increase .
■ Do not use worn-out or poorly matching fittings
and extensions, as there is a high probability that
this will lead to a significant vibration increase .
■ Consumables and the machine tool should be
selected, maintained and replaced in accord-
ance with the recommendations in this guide
in order to avoid an unnecessary vibration
increase .
■ Sleeve fittings should be used if possible .
■ Use a stand, clamp or balancing unit to support
the weight of the machine wherever possible .
■ Hold the machine securely but not too firmly
while maintaining the necessary hand-reaction
force, as the vibration risk generally increases the
harder the machine is held .
■ An inadequately mounted or damaged acces-
sory tool can lead to excessive vibrations .
Additional safety instructions for
pneumatic machines
■ Compressed air can cause serious injuries:
–When the machine is not in use, the air
supply must always be shut off and the air
hose depressurised . The machine must be
disconnected from the compressed air supply
before replacing accessories or when carry-
ing out repair work .
–Never aim the airflow at yourself or anyone
else .
■ Thrashing hoses can cause serious injury .
You should therefore always check whether the
hoses and their fixings are undamaged and
have not come loose .
■ Cold air must be directed away from the hands .
■ Do not use quick-lock couplings on the tool inlet
for impact and impulse drills . For hose connec-
tions with a thread, always only use those made
of tempered steel (or a material with compara-
ble impact resistance) .
PDSS 310 B5
■ If universal rotary joints (claw couplings) are
used, locking pins must be inserted and Whip-
check hose restraints must be used to provide
protection in the event of failure of the con-
nection between the hose and the machine or
between one hose and another .
■ Ensure that the maximum permissible pressure
specified on the machine is not exceeded .
■ For torque-controlled machines with continuous
rotation, the air pressure has safety-related
effects on performance . Requirements for the
length and diameter of the hose must therefore
be defined .
■ Never carry pneumatic machines by the hose .

Additional safety information

■ If applicable, observe special work safety or
accident prevention regulations for the handling
of compressors and compressed air tools .
■ Ensure that the maximum permissible working
pressure specified in the technical data is not
exceeded .
■ Do not overload this tool – use this tool only
within the capacity range specified in the
Technical Data .
■ Use safe lubricants . Ensure that the work area is
sufficiently ventilated . In the event of increased
discharge: Check the compressed air tool and
have it repaired if necessary .
■ Do not use this tool if you are distracted .
Be alert, watch what you are doing and use
common sense when operating a compressed
air tool . Do not use tools if you feel tired or are
under the influence of drugs, alcohol, or medi-
cation . A moment of inattention when operating
the tool can result in serious personal injuries .
■ Keep work area clean and well lit .
Cluttered or dark areas invite accidents .
■ Keep compressed air tools out of the reach
of children .
■ Do not store the tool outdoors or in damp en-
vironments without protection .
■ Protect the compressed air tool from dust and
dirt, particularly the compressed air connection
and the operating elements .
GB │ IE │ 9 ■