Impres Battery Charging Indicators - Motorola Solutions IMPRES PMPN4527 Manual Del Usuario

2 Plug the wall power adapter into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the IMPRES Battery Charging Indicators on page
3 Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved
battery into the charger pocket.
a Align the battery contacts with the charger contacts.
b Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger
indicator illuminates, indicating the charger has recognized the presence of the battery.
4 To remove a radio or Motorola Solutions-approved battery from the charger, pull straight up until
the battery completely clears the charger housing.
2.2

IMPRES Battery Charging Indicators

Table 1: IMPRES Battery Charging Indicators
Status
Charger Power On
Rapid Charging
Charged to 90 % or
more
Charged to 95 % or
more
Calibration
Fault
LED Status
Chapter 2 : IMPRES Batteries and Chargers
1
9.
Green for approx. 1
sec
Steady red
Flashing green
Steady green
Steady amber
Flashing red
MN007272A01-AA
Comments
Successful charger
power-up.
Battery in rapid
charge mode.
Battery is charged to
90 % or greater ca-
pacity.
Battery is charged to
95 % or greater ca-
pacity.
Battery is in recon-
dition or calibration
mode.
Not chargeable; re-
move and re-insert ra-
dio or battery.
9