Cleaning The Folded Fi Lter; Cleaning The Air Filter; Storage; Disposal/Environmental Protection - Parkside PAS 1200 C2 Traducción Del Manual De Instrucciones Original

• Remove the container lid (
empty the metal container (
Clean the metal container (
water and allow it to dry.
• After removing the suction
hose ( 15), clean the dust and soot
particles from the connections. This
ensures that the suction hose (
can be inserted again easily.
• Clean the folded fi lter (
"Cleaning the folded fi lter").
B C D
Cleaning the folded fi lter
Replace the pleated fi lter (18) if it
L M N
is worn, damaged or heavily soiled
(see "replacement parts").
V W X
1. Take off the container cover (10).
2. Rotate the folded fi lter (18) in an anti-
clockwise direction and remove it.
3. Tap out the pleated fi lter (18) and clean
it with a paintbrush or hand brush.
Don't wash the pleated (18) fi l-
ter in water.
4. Place the folded fi lter (18) on the inver-
ted container cover (10).
6. Screw in the folded fi lter (18) tightly in
a clockwise direction.
The folded fi lter (18)
must rest on the
container cover (10).
Then press down the
switch of the safety switch (19).
The arrow on the folded fi lter (18) must
be at the same height as the arrow on
the label of the container cover (10).

Cleaning the Air Filter

1. Take off the container cover (10) and
the folded fi lter (
2. Take the air fi lter (20) out of the fi lter
housing (21).
10) and
13).
13) with
15)
18) (see
E F G
O P Q
Y Z
19
18).
3. Clean the fi lter (20) with soap and
water and allow it to dry in the air.
4. Place the air fi lter (20) back in the fi lter
housing (21).

Storage

• To store, wind the power cord (1)
around the retaining bracket (6) on the
container lid (10).
• Insert the rotatable plastic end piece of
the suction tube (15) in the holder pro-
H I
vided (4) and tighten it. Place the other
end of the hose on the holder (2).
• Place the suction tuber (16) on the reel
R S
with attachment port (14).
• Keep the equipment in a dry place, out
of reach of children.
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have fi nished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
GB
J
T
IE
23