Switching On/Off; Dry Vacuuming; Wet Vacuuming; Blow Function - Parkside PNTS 23 E Instrucciones De Utilización Y De Seguridad

GB MT
- Connect the suction hose (15)
(bayonet fi xing).
- Fit the handle (16)
- Fit the telescopic suction pipe
(13).
(Pull the knob on the telescopic
suction pipe in the
and separate to the desired
length).
- Fit the desired nozzle.
To store the suction set during breaks,
push together the telescopic suction
hose and plug the suction pipe holder
into the socket on the motor housing
(see small picture below).

Switching on/off

Connect the mains plug.
Do not vacuum without a fi lter!
(How to insert the fi lter is described in
the chapters "dry vacuuming" and "wet
vacuuming").
Switching On:
On/Off Switch (see
In position "I"
Switching Off:
On/Off Switch (see
In position "0"

Dry vacuuming

1. For dry vacuuming, fi t the pleated fi lter (20)
onto the fi lter basket on the motor head (1).
The sealing lip that curves upward must
point away from the motor head.
2. Fit the fi lter cover (19) and lock it with a
light turn:
Lock the fi lter cover
Unlock the fi lter cover
32
All manuals and user guides at all-guides.com
direction
no. 3)
no. 3)
Vacuuming fi ne dust:
While vacuuming fi ne dust, you may
fi nd dirt accumulating faster than usu-
al. For this reason, we recommend the
use of a paper fi lter bag for fi ne dust.
1. Fit the pleated fi lter (20).
2. Completely unfold the paper fi lter bag (21)
and pull it over the internal suction nozzle
(5) in the stainless steel container (6) (see
). The connector on the suction noz-
zle must be completely enclosed by the
sealing ring on the fi lter bag opening.

Wet vacuuming

For wet vacuuming or to vacuum water, fi t the
foam fi lter (18) to the fi lter basket on the mo-
tor head (1).
When the container is full, the suction
opening is shut off by a fl oat, and suc-
tion is then cut off.
Switch the appliance off, remove the
plug from the socket and empty the
container (see Cleaning/Maintenance/
Storage).
If foam or liquid exits, switch off the
machine immediately.

Blow Function

• To blow, take off the air diffuser (17) (bay-
onet fi xing).
• Screw the suction hose (15) (bayonet fi x-
ing) onto the blow connection (11) on the
motor head (1).
Cleaning/Maintenance/
Storage
Pull out the mains plug.
Danger of electric shock.