Festo SPC200 Manual De Instrucciones página 16

All manuals and user guides at all-guides.com
3 Fitting
The control panel type SPC200−MMI−1F is intended for
fitting onto a front plate. For fastening, you will require a
space of approx. 114 x 102 x 70 mm and a cut−out section
of approx. 92 x 92 mm. The front plate must not be thicker
than 4 mm.
The following diagram shows the appropriate dimensions.
1
Control panel (side view)
2
Control panel (rear view)
Festo SPC200−MMI−1F 0503a English
1 2
3
Fastening hooks (included in
delivery)
3
13