Ravelli RBV 808 Manual De Uso Y Mantenimiento página 64

Rev.1 14/02/18
Pag.64
EN
Settings
Below are given the steps for accessing the relative menu starting from Stand-By mode.
MANUFACTURER
ENGINEER
Press the key "access menu" to access
the
MENU page
After following the procedure above step by step, you can set the following functions:
Settings > Contrast
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
Use the UP/DOWN keys to change
contrast setting and obtain a better visualisation
of the information shwon on the handheld set. The
value can vary from 0 to 100. 50 with respect to
Settings > Firmware version
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
By pressing the following button you will confirm the data and switch to the page within the SETTINGS menu.
SETTINGS.
Settings > Adjust
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
Use the UP/DOWN keys to
change the value read by
the room temperature probe
installed inside the handheld set, with respect to a
reference value. The value can vary from -10°C to
10°C. The standard value is 0°C.
Use and maintenance manual RBV 808 - RBV 810
MENU
USER
Press the key
"confirm"
to access the
USER page
ADJUST
Press the key
"selection" to switch
to the function CON-
TRAST.
ADJUST
Press the key
"selection" to switch
to the function CON-
TRAST.
Press the key "selection" to
switch to the function VERSION
FW.
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
"selection" to quickly
switch to the second
page of the menu
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
SETTINGS.
Press the key "confirm"
to access the function
By pressing the following button you will
confirm the data and switch to the page within
the SETTINGS menu.
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
to access the function
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
to access the function
By pressing the following
button you will confirm the
data and switch to the page
within the SETTINGS menu.
USER
COMFORT CLIMA
SETTINGS
Press the key
CONTRAST
STREAMER
"confirm"
ADJUST
"confirm"