Safety Notes
• This car is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta,
Märklin Digital or Märklin Systems).
• Use only switched mode power supply units and trans-
formers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
Important Notes
• If this car is not used in the "Helevetia2 (43853) train
consist, the 72020 current-conducting coupler must be
replaced by the 7203 coupler. Contact with metal cou-
plers will cause a short circuit!
• Only the pickup shoe on the 43866 car may be used when
the car is part of a train consist with current-conducting
couplers or couplings. The pickup shoes on the cars in
the 43853/43854 sets must be removed.
• The 7203 coupler must be used at the end and beginning
of a train consist with. Danger of short circuit!
• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
6
All manuals and user guides at all-guides.com
• The warranty card included with this product specifies
• Disposing: www.maerklin.com/en/imprint.html
Functions
• Recognition of the mode of operation: automatic.
• Addresses that can be set:
• Address set at the factory: 78
• Mfx technology for the Mobile Station / Central Station.
• Setting the parameters (address, volume):
• Various controllable functions.
• The interior lights and the table lamps are available in
the warranty conditions.
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
Name set at the factory: Speisewagen DB
with the Control Unit, Mobile Station, Central Station.
analog operation.