Generac G0062700 Directrices De Instalación página 37

Active Alarm LED
STEPPER
RED
OVERCURRENT
MISWIRE RED
OVERVOLTAGE RED
LOW BATTERY YELLOW
BATTERY
YELLOW
PROBLEM
CHARGER
YELLOW
WARNING
SERVICE A YELLOW
SERVICE B YELLOW
INSPECT BATTERY YELLOW
Installation Guidelines For 50 Hz Air-Cooled Generators
Problem Things to Check
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Unit will not start in Check the LED's /
AUTO with utility loss. Screen for alarms.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Yellow LED illuminated in Check the screen for
any state. additional information.
Troubleshooting / Quick Reference Guide
Solution
Contact an Independent Authorized
Servicing Dealer.
Contact an Independent Authorized
Servicing Dealer.
Contact an Independent Authorized
Servicing Dealer.
Clear alarm. Using the control panel, check
the battery by navigating to the BATTERY
MENU option from the MAIN MENU. If it
states battery is GOOD, contact an
Independent Authorized Servicing Dealer.
If it states CHECK BATTERY, replace the
battery.
Contact an Independent Authorized
Servicing Dealer.
Contact an Independent Authorized
Servicing Dealer
Perform SERVICE A maintenance. Press
ENTER to clear.
Perform SERVICE B maintenance. Press
ENTER to clear.
Inspect Battery. Press ENTER to clear.
33