Descargar Imprimir esta página

marklin TRIX RAB Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Function
• Built-in electronic circuit for operation with a conventional DC
power pack (max. ±12 volts), Trix Systems, Trix Selectrix or NMRA
DCC digital systems.
• Automatic system recognition between digital and analog operation.
• No automatic system recognition between Selectrix (SX) and DCC.
• The full range of functions is only available under Trix Systems and
under DCC.
• Headlights for the locomotive change over with the direction of
travel. They can be turned on and off in digital operation.
• Depending on the length of the train, a stop or braking block must
be relatively long, so that the train will remain stopped as desired.
Notes on operation with direct current
• A filtered direct voltage is required for operation. Operating
systems with pulse duration control are therefore unsuitable.
Controllable Functions
Headlights / Red marker light / Interior lights
Sound effect: Station announcements
Sound effect: Whistle blast
ABV
10
All manuals and user guides at all-guides.com
Notes on digital operation
• The first time the locomotive is used in a digital system (Selectrix
• The operating instructions for your central unit will give you exact
• This locomotive comes from the factory programmed for the digital
• Correct programming with the 66920 Mobile Station is possible
• Information about DCC Operation:
Analog
DC
Continuously on
or DCC), the decoder must be set for this digital system. To do
this, the decoder must be programmed once in this digital system
(Example: changing an address).
procedures for setting the different parameters.
address "01" (Selectrix) / "03" (DCC). Number of speed levels that
have been set: 28 (DCC) and 31 (Selectrix).
starting with version number 034.
The setting done at the factory does not permit operation with
opposite polarity DC power in the braking block. If you want
this characteristic, you must do without conventional DC power
operation (CV 29 / Bit 2 = 0).
Central- Control
66800
1
2
3
4
5
6
7
8
9
ON
ST OP
PR
Sx
1/2
Lz
Headlight button
1
5
systems
STOP
mobile station
Function 2
Function 3
Function 4

Publicidad

loading

Este manual también es adecuado para:

22236