Nolan X-lite X-901 Instrucciones De Utilizacion página 21

LEXAN ® variable thickness scratch resistant visor
1
2
Warning! When the visor is in its minimum opening position,
see 1.1.1, control automatic closure as follows: lift the visor to its
half-way open position, then bring it down until it closes automati-
cally.
1.1 - Visor opening
Follow these instructions to open the visor:
1.1.1 - Lift the red opening lever on the helmet's
chin-guard. (Fig.1)
The visor will move forwards and its lateral ends
will move outwards (Fig. 2), until it automatically
sets to its minimum opening position.
Warning! This position is advisable when the
vehicle is stopped or travels at low speed; in this
position the visor is held slightly open to improve
ventilation and de-misting.
1.1.2 - Lift the visor to its half-way open position.
1.1.3 - Lift some more to the visor full opening
position.
1.2 - Visor closing
When the visor is in its half-way open or fully open
positions, perform the following operations to
close it:
1.2.1 - Lower the visor to its first opening position;
the visor will automatically return to its fully closed
position, perfectly sealed along the porthole edge.
- 19 -