Operation; Connecting The Electrical Appliance To Be Tested; Current Measurement - elv EM 240 Instrucciones De Utilización Y De Seguridad

©

Operation

k
Connecting the electrical
appliance to be tested
CAUTION! RISK OF FATAL INJURY BY ELECTRIC
SHOCK! Only measure voltages of over 25 V ~ in compliance
with the relevant safety instructions for the electrical appliance
you wish to test.
CAUTION! RISK OF INJURY! Never exceed the
stated maximum input voltage.
Plug the wattmeter into a suitable outlet.
Now plug the mains plug of the electrical appliance you
wish to test into the socket 6 of the wattmeter.
k

Current measurement

Press the "UP" button 5 until the Ampere symbol 9
appears in the top third of the LC display 1 .
Note: the "Current measurement" function is the standard
setting for the wattmeter. As soon as the isolating strip
between the two round cell batteries is removed, the
wattmeter is automatically in this mode.
Operation
GB 53