Total Energy Consumption - elv EM 240 Instrucciones De Utilización Y De Seguridad

8. Repeat step 6 to set the tens and units digit.
Example: 1.111
9. Press the "PRICE" button 3 to confirm your entry.
Note: the setting made here affects the "Display energy
costs" function.
k

Total energy consumption

Note: this mode displays the accumulated total energy in
kWh consumed by connected electrical devices since the
start of measurement.
Note: Check that standard displays (see "Measuring the
current" and "Measuring the mains voltage") appear in the
top and middle thirds of the LC display 1 .
Press the "PRICE" button 3 repeatedly until the kilo-
watt-hours symbol 17 and the total symbol 16 appear
in the bottom third of the LC display 1 .
Note: the "Total power consumption" function is the
standard setting for the wattmeter. As soon as the isolating
strip between the two round cell batteries is removed, the
wattmeter is automatically in this mode.
Operation
GB 63