Measure Mains Voltage - elv EM 240 Instrucciones De Utilización Y De Seguridad

3. Press the "UP" 5 or "DOWN" button 4 to select
either the overload warning value for power consumption
(W) 8 or the overload warning value for current (A) 9 .
4. Press the "SET" button 2 . The first digit flashes.
5. Press the "UP" 5 or "DOWN" button 4 to set the
required value.
6. Press the "SET" button 2 to move to the next digit.
7. Repeat steps 5 and 6 until you have set the required
overload warning value.
8. When you have set the value for the last digit, press the
"PRICE" button 3 to confirm your entry.
Note: as soon as the entered overload warning values are
exceeded by any connected electrical appliance you are
testing, the overload symbol 7 flashes and a warning
signal sounds.
k

Measure mains voltage

Press the "DOWN" button 4 until the Volt symbol 10
appears in the centre of the LC display 1 .
Note: the "Measure mains voltage" function is the
standard setting for the wattmeter. As soon as the isolating
Operation
GB 57