Show Energy Costs - elv EM 240 Instrucciones De Utilización Y De Seguridad

Note: you can also call up the total time when the
wattmeter has been removed from the outlet or when
the electrical appliance you are testing is no longer
connected to the wattmeter.
Note: as soon as the wattmeter indicates that the current
is too weak (0.00 A in "Measure current" mode), the time
measurement function stops.
Note: the time measurement function stops as soon as you
unplug the electrical appliance you are testing from the
socket 6 of the wattmeter. As soon as you plug another
electrical appliance into the wattmeter, the time measurement
function resumes.
k

Show energy costs

Note: the total cost of the consumed energy is shown
in € (Euro).
Note: the total cost of the consumed energy is calculated
on the basis of the set price per kWh (See "Set electricity
rate 1 and 2", "Set electricity flat-rate").
Note: Check that standard displays (see "Measuring the
current" and "Measuring the mains voltage") appear in the
top and middle thirds of the LC display 1 .
Operation
GB 65