Delete Maximum Values; Set The Overload Warning Value; Proceed As Follows - elv EM 240 Instrucciones De Utilización Y De Seguridad

Operation
k

Delete maximum values

Use the "UP" button 5 to select one of the two maximum
values (see "Maximum current", "Maximum power
consumption").
Keep the "SET" button 2 pressed for approx.
3 seconds to set the maximum value to 0.
k

Set the overload warning value

Note: in this mode you have a choice between two over-
load warning values. You can set an overload warning value
for the current (A) and an overload warning value for the
power consumption (W).
Note: the overload warning value for power consumption
(W) 8 is set by default to 0,0 W on delivery.

Proceed as follows:

1. Press the "UP" button 5 until the overload symbol 7
("OVERLOAD") appears in the top third of the LC
display 1 .
2. Now press the "SET" button 2 . The ampere symbol 9
starts to flash.
56 GB