k
Changing the batteries
Note: as soon as you remove the round cell batteries from
the wattmeter, all the saved values are automatically deleted.
Proceed as follows:
Remove the battery compartment cover 21 by unscrewing
the two screws with a suitable screwdriver.
Remove the two round cell batteries from the holder on
the back of the battery compartment cover 21 .
Insert two new batteries (Alkaline LR44, 1.5 V
holder on the back of the battery compartment cover 21 .
Note: make sure when inserting the batteries that the
polarity is correct. This is indicated in the battery com-
partment.
Close the battery compartment by replacing the battery
compartment cover 21 . Please make sure that you
retighten the two screws firmly.
Note: make sure that you replace the battery compart-
ment cover 21 the right way round. The rounded corners
of the battery compartment cover 21 must fit into the
rounded recesses in the battery compartment.
Operation
) in the
GB
67