elv EM 240 Instrucciones De Utilización Y De Seguridad página 61

14. Press the "SET" button 2 . The first digit starts to flash.
15. Press the "UP" 5 or "DOWN" button 4 to set the
units digit before the decimal point of the current price
per kWh in Euro (€) for electricity rate 2. Example: 1.000
16. Press the "SET" button 2 to move to the next digit.
17. Press the "UP" 5 or "DOWN" button 4 to set the
hundreds digit of the current price per kWh in Eurocent (€)
for electricity rate 2. Example: 1.100
18. Press the "SET" button 2 to move to the next digit.
19. Repeat step 17 to set the tens and units digit.
Example: 1.111
20. Press the "SET" button 2 . The time display in the bottom
third of the LC display 1 starts to flash.
21. Press the "UP" button 5 to set the starting time for
electricity rate 2 in hours.
22. Press the "DOWN" button 4 to set the starting time for
electricity rate 2 in minutes.
23. Press the "PRICE" button 3 to confirm your entry. The
power cost meter begins measuring the cost of energy
consumed in electricity rate 2 at the set starting time.
Note: These settings affect the "Display energy costs"
function.
Operation
GB 61