Stage 2 Base Assembly - Evenflo Exer Saucer Triple Fun Manual De Instrucciones

C
F
C
F
G
H
J
F
C
C
3. To install a pedestal
the locking tab with the rib
slot with the notch
D
I
4. Attach the spring
shown. Once the spring is in place, align all three locking
J
tabs on the pedestal with the slots in the base and snap
the pedestal into place.
J
5. Turn the base F
locking tabs J on each pedestal
through to the underside of the base
over the edge of the openings, as shown.
6. Check to ensure that the locking tabs are installed properly
by turning the pedestal
The pedestal MUST spring back into place.
Repeat for all four pedestals.
3

Stage 2 Base Assembly

C
, hold it above the base
G
lines up directly over the
H
.
D I
to the hook on the base
upside down and make sure the
C are completely pushed
F
and have locked
C
clockwise, then releasing.
F
so that
F
, as