Etac Molift Partner 255 Manual De Usuario página 12

Molift Partner 255 / www.etac.com
Charging
Charger
Light
Battery
Charger
Mains cable
(disconnecting
device)
Battery Charger
The battery charger can be used as a tabletop
charger or mounted to a vertical wall surface
close to a power outlet, minimum 120 cm above
the floor. The charger has to be used outside the
patient environment. The Charger must be placed
or installed in a way that makes it easy to discon-
nect mains cable plug. Take care not to damage
the cable. The charger can be connected to the
power outlet at all times.
Battery Charger 12-24V
Art. no. 1340100
Battery PowerPac 26,4 V NiMH
Art. no. 1341000
Charger Light
Description of charger light:
Charger light
Yellow
Yellow
Red
Green/Yellow
Green
Red/Green
Mode
Ready for use, no bat-
tery connected
Initialization
Fast Charge
Top-off charge
Trickle charge
Error
Integrated charger (optional)
The lifter can be charged without removing the
battery from lifter with integrated charger. Park
the lifter and connect to a wall socket to charge
the battery. Lifter can be delivered with integrated
charger or it can be delivered as an accessory and
retrofitted.
Integrated charger
Art. no. 1340101
12