Selection Of The Operation Mode; Automatic Mode (Auto) - Vaillant VAI 6-025 WN Manual Del Usuario

OPERATING INSTRUCTIONS
7.5

Selection of the operation mode

7.5.1

Automatic mode (AUTO)

In automatic mode (AUTO) the Air to Air heat pump unit
automatically selects the cooling (COOL) or heating (HEAT)
mode in accordance with the actual ambient temperature.
• In COOL mode the set room temperature is 25º C. Above
this room temperature the unit will operate in COOL mode.
• In HEAT mode the set room temperature is 20º C. Below
this room temperature the unit will operate in HEAT mode.
3
Fig. 7.3 Automatic mode selection.
Legend
1 MODE button
2 - / + button
3 AUTO mode indicator
- 10 -
All manuals and user guides at all-guides.com
1
2
In order to activate:
With the unit switched on (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.4 Operation modes.
• Select the automatic operation mode (AUTO).
• Press the TEMP / TIME buttons to select the temperature
setting.
When pressing the - / + buttons, the temperature
configuration will increase or decrease by 1ºC.
When the fan is configured in AUTO mode, the Air to Air heat
pumps unit automatically sets the fan speed in accordance
with the actual ambient temperature.
VAI6-WN-U_EN - 10/13 - Vaillant