Programming Menu - Constant Functioning; Functioning Capacity; Functioning Period - Aqua HC997-1 Manual De Programación

HC997-999 – MOD. A
Digital multifunction solenoid metering pump
– C
4.3 P
ROGRAMMING MENU
4.3.1

Functioning Capacity

The pump doses at a constant flow rate set in different unit of measurements (%, SPM,
ml/min, L/h) – see the setting menu.
When the pump is powered, it performs a continuous dosing at the programmed flow
rate.
Press the
Press the
4.3.2

Functioning Period

ADSP9000026
All manuals and user guides at all-guides.com
ONSTANT FUNCTIONING
Press the
menu.
Press the
keys to set the desired values.
key to go at the previous menu.
The pump doses for programmed time and flow rate.
In this functioning mode there are two parameter to set:

Period (working time)
Setting from 1 to 240 minutes at steps of 1 minute.

Functioning that can be in different units of measurement (%, SPM, ml/min,
L/h) – see the settings menu.
Example: Period = 10 minutes
The pump doses per 10 minutes at the 100% of the maximum flow rate.
Press the keys to set the desired values.
Press the key to go at the previous menu.
18/09/2015 Rev.1.5
CONSTANT FUNCTIONING
keys to scroll the entries of the
key to choice the entry desired.
Functioning = 100%
ENGLISH
27/100