Settings Menu - Date And Clock; Settings Menu - Calibration; Settings Menu - Units Of Measurement - Aqua HC997-1 Manual De Programación

HC997-999 – MOD. A
Digital multifunction solenoid metering pump
Settings menu – Date and clock
4.6.2
This menu allow to set the date and clock..
Press the
Press the
Press the
previous field.
Settings menu – Calibration
4.6.3
This menu allows to set the flow rate in mL of the pump in
100 strokes.
To perform the calibration following this procedure:
Settings menu – Units of measurement
4.6.4
ADSP9000026
All manuals and user guides at all-guides.com
keys to set the desired values.
key to move the cursor on the next field, the value to modify is blinking.
key to go back at the previous menu or move the cursor at the
2. Priming the pump, the chemical has to go out from the
delivery.
3. Positioning a graduate container (at least 250 mL) on
the suction of the pump.
4. Save the quantity of the chemical inside the container
(L1).
5. Enter in the calibration menu and activate the pump.
6. A countdown will start.
7. When the pump stops, save the remaining quantity of
chemical inside the container (L2).
8. Press the
is the difference between L1- L2 and then press the
key to confirm.
This menu allows to set the units of measurement of the
pump's flow rate.
The units of measure L/h e mL/min are active only after the
calibration.
Press the
Press the
18/09/2015 Rev.1.5
SETTINGS AND CALIBRATION
keys to set the mL drawn that
keys to scroll the menu entries..
key to select the desired entry.
ENGLISH
35/100