Setting Language; Setting Date And Time - LEXIBOOK DJ052 Serie Manual De Instrucciones

1. Turn on the camera and press the MENU button (19). Press the RIGHT/FLASH button
(14) to access the system settings in the Setup Menu.
2. Press the DOWN/MODE button (15) to select [Format] and then press the OK button
(17) to launch the sub-menu.
3. Press the DOWN/MODE button (15) to select the item [Execute] and then press the OK
button (17) to erase all data.
4. Press the LEFT/SELF-TIMER button (16) twice to close the menus.
After switching on the camera for the first time, set the language, date and time before
using it.
1. Turn on the camera and press the MENU button (19). Press the RIGHT/FLASH
button (14) to access the system settings in the Setup menu. (See the 'Settings Menu
(Capture Mode) >Setup' section on page 26 for further instructions on how to do this.)
2. Press the DOWN/MODE (15) button to select [Language], then press the OK button
(17) to launch the sub-menu.
3. Press the UP/DISPLAY (13) or DOWN/MODE (15) button to select the desired language
(English, Spanish, Portuguese, French, German, Italian or Dutch) and then press the
OK button (17) to confirm the setting.
4. Press the LEFT/SELF-TIMER button (16) twice to close the menus.
1. Turn on the camera and press the MENU button (19). Press the RIGHT/FLASH button
(14) to access the system settings in the Setup Menu.
2. Press the DOWN/MODE(15) button to select [Date Input],
then press the OK button (16) to launch the sub-menu.
3. Press the DOWN/MODE (15) button to select [Set], then
press the OK button (16) to enter the date and time setting
interface.
4. Press the UP/DISPLAY (13) or DOWN/MODE (15) button
to change the date display form.
5. Press the RIGHT/FLASH (14) or LEFT/SELF-TIMER
button (16) to move between settings and the UP/DISPLAY (13) or DOWN/MODE (15)
button to reach the desired value.
6. Press the OK button (16) to confirm the setting.
7. Press the LEFT/SELF-TIMER button (14) twice to close the menus.
26
DJ052seriesIM1242_15Jun_V09.indb 26

SETTING LANGUAGE

SETTING DATE AND TIME

INST
INSTALLI
1. Insert th
2. In the m
3. Follow
4. To laun
System re
RAM, 400
card with
INSTALLI
1. Insert th
2. In the m
extraction
3. Select y
4. "The M
instruction
5. Once y
on the des
6. To start
taken with
System re
I 7. PC wi
MB hard d
resolution
Note: To e
you need
This came
To change
between m
15/06/2012 11:03 AM
Ca
Vid
Au